**** CREATED WITH DEMO COPY OF TABLOOM ***




WARNING:
  Most provider allow 10 try for enter Unlock Code.  If you attempt too many wrong ones, it will hardlock the phone. (0 Attempts) Please do not continue till 0 attempts, instead contact us or read the instructions at the bottom of this page.
 
 
Model: Curve 8300, 8310, 8320, 8520, 8800, 8820, 8900, Bold 9000, 9630 Tour, 9700 Bold
Before you start, you MUST have a Sim Card (could be Active or Inactive) & turn OFF ALL wireless radios
1. Press the Menu key
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Options icon.
5. Scroll to and select Advanced Options.
6. Scroll to and select SIM Card.
7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen. This step opens up the personalization on the device.
8. Type MEP then hold ‘ALT” key and type number 2. Note: When typing in MEP ATL 2 the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
9. Enter the unlock code.
10. Press the trackball (“Code Accepted should display)
11. Press and hold the red End key to turn the handheld off and then back on.
12. Once the device has powered on, follow steps 1 & 2 and restore connections.


Model:  6xxx 7xxx: Example; 6230, 7100, and 7290 etc.:
Before you start, you MUST take out the Sim Card & turn OFF ALL wireless radios
1. Press the Menu key
2. Select Options / Settings
3. Select Sim Card
4. Enter MEPD (not case sensitive), Note: When typing in MEPD, the letters will not appear on the screen
5. Then enter MEP Hold Alt Key and type number 2.  NOTE: You must use the "alt" key to enable numbers, example: enter MEP hold "ALT key" and enter 2.  Note: When typing in MEP2, the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.  If you do not see “Enter Network MEP” box, you didn't type in MEP2 properly.
 
 
Model:  7100, 8100, 8110, 8120 & 8220:
Before you start, you MUST take out the Sim Card & turn OFF ALL wireless radios
1. Press the Menu key
2. Scroll to Turn Wireless Off and press the trackball (Will show Turn Wireless ON).
3. Scroll to Options and press the trackball.
4. Scroll to Advanced Options and press the trackball.
5. Scroll to SIM Card and press the trackball.
6. Type MEPD (not case sensitive). Notice:  Keep in mind for mepd is meoop on these model.  Because oo = p.  Note: When typing in MEPD, the letters will not appear on the screen. This step opens up the personalization on the device.
7. Type MEP, then hold ALT key and type number 2.  Note: When typing in MEP2 the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box. 
8. Enter Unlock Code
9. Press the Enter Key. (Make sure you press the Enter Key within 5 second or you have to enter the unlock code again).

 
Model:  8700, 8700c, 8700g, 8700r
Before you start, you MUST take out the Sim Card & turn OFF ALL wireless radios
1. Press the Menu key
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Setting icon.
5. Scroll to Options
6. Scroll to and select Advanced Options.
7. Scroll to and select SIM Card.
8. Type MEPD Note: When typing in MEPD the letters will not appear on the screen. This step opens up the personalization on the device.
9. Type MEP then hold ‘ALT” key and type number 2. Note: When typing in MEP ATL 2 the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
10. Enter the unlock code.
11. Press the Joydial to confirm (“Code Accepted should display)
12. Press and hold the red End key to turn the handheld off and then back on.
13. Once the device has powered on, follow steps 1 & 2 and restore connections.
 
 
Method 1: Model: 9500, 9530 Storm, 9550 Storm 2, Telus, Bell Canada Storm Before you start, you MUST have an Unauthorized Sim Card inserted.  An unauthorized Sim Card is a Sim Card that is NOT belong to the provider of the phone.  Example:  If you have a Verizon phone, you need to insert a T-Mobile Sim Card inside the phone before turn it on.
1. Power on the phone.
2. Phone will said "MEP check failed.  Do you want to enter MEP unlock code".  Select Yes.
3. "Enter Network MEP code (# left)".  Enter the unlock code.
4. Press Enter,  you should see “Code Accepted”
5. You need to check Network Connection is set on GSM/UMTS.  Menu>Manage Connection>Mobile Network Options and make sure it GSM/UMTS.
6. Once GSM/UMTS is selected.  You can now ready to make phone call.
Notice:  If the network not working after your phone is fully charged and unlocking process “Code Accepted”.  You must change from Verizon CDMA network to GSM Global Network a few times, after change from Verizon CDMA to GSM Global 3 times is completed, leaves it on GSM Global Network.  Now it should work. (Verizon 8830 World Edition DOES NOT work in USA)
Method 2: Model: 8830, 9500, 9530 Storm, 9550 Storm 2, Telus, Bell Canada Storm Before you start, you MUST have Sim Card inserted & turn OFF ALL wireless radios, turn the phone sideways so you get the full QWERTY keypad.
1. Press the Menu key
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Options icon.
5. Scroll to and select Advanced Options.
6. Scroll to and select SIM Card.
7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen, this step open up the personalization on the device.
8. Type MEP then hold ‘ALT” key and type number 2. Note: When typing in MEP ATL 2 the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
9. Enter the unlock code.
10. Press Enter (Press the trackball for 8830),  you should see “Code Accepted”
11. Press and hold power key to turn the handheld off and then back on.
12. Once the device has powered on, follow steps 1 & 2 and restore connections.
Notice: If the network not working after your phone is fully charged and unlocking process “Code Accepted”.  You must change from Verizon CDMA network to GSM Global Network a few times, after change from Verizon CDMA to GSM Global 3 times is completed, leaves it on GSM Global Network.  Now it should work. (Verizon 8830 World Edition DOES NOT work in USA)
 
 
Removing "Activation Required" on the screen for Verizon Storm:
1. On the main screen, press ##000000
2. For the Mobile Directory Number, Enter your phone number in here.
3. Press the Menu to save the options and the phone will automatically restart.
 
 
Removing "Activation Required" on the screen for Sprint 8830/Tour:
1. Instructions are below under MSL Unlocking.
2. If you need to purchase an MSL code, Please contact me at
swiftunlocks@gmail.com for pricing
 
Model: ONLY for Telus & Bell Mobility 9000, 9700 Bold
Before you start, you MUST have a Sim Card (could be Active or Inactive) & turn OFF ALL wireless radios
1. Press the Menu key
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Options icon.
5. Scroll to and select Advanced Options.
6. Scroll to and select SIM Card.
7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen. This step opens up the Personalization on the device.  Look at Network, if it appear the word "Active", then continue to step number 8.  If Network appear "Inactive/Disabled" then skip 8-10 and continue to step number 11 (use only the MEP4 code we provided.  Your phone does not requires MEP2 code).
8. Type MEP then hold ‘ALT” key and type number 2. Note: When typing in MEP ATL 2 the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
9. Enter the MEP2 unlock code.
10. Press the trackball (“Code Accepted" should display).
11. Type MEP then hold "ALT" key and type number 4.
12. Enter the MEP4 unlock code.
13. Press the trackball ("Code Accepted" should display again).
14. Press and hold the red End key to turn the handheld off and then back on.
15. Once the device has powered on, follow steps 1 & 2 and restore connections.
 
MSL CDMA Unlock Codes for your BlackBerry 9630 Tour
To use this code:
1. From the homescreen of the BlackBerry, press the green call button to enter the phone. 2. Type in ##MSL CODE then the green talk button (ie: ##123456 Green talk button). 3. In the CDMA service edit screen, delete the number in the first row (000000xxxx) and replace it with your current phone number. 4. Press the menu key and choose save. 5. The device will re-boot.
When the device re-boots, Activation Required will be gone and the active  carrier name will now appear.
Known issue for Verizon 8830 World Edition & 9530 Storm, 9550 Storm 2, Tour 9630:
1. If your Storm is not recognizing the network, make sure your phone battery is full and the radio is on.
2. Sometimes the phone requires you to do "MEPPD" and “MEPP2” instead of "MEPD" and "MEP2".  If this occurs, redo unlock step above with "MEPPD" and “MEPP2”
3. If the network not working after your phone is fully charged and unlocking process “Code Accepted”.  You must change from Verizon CDMA network to GSM Global Network a few times, after change from Verizon CDMA to GSM Global 3 times is completed, leaves it on GSM Global Network.  Now it should work. (Verizon 8830 World Edition DOES NOT work in USA)
 
 
How to do a wipe?
In order to perform a manual wipe of your entire BlackBerry, you will need to do the following: (This will erase all Data. Please do this was caution)
Options > Security Options > General Settings > Click the trackwheel/trackball on the Password field > Select “Wipe Handheld“. As with the above method you be prompted to enter “blackberry” (no quotes) in order confirm the system wipe.
 
How to get correct code?
(MEP Reader method)
http://www.swiftunlocks.net/MEP_Reader.zip
1.
      Download File.
2.
      Open Software (also runs better if you have Blackberry Desktop Manager)
3.
       Press read Button
4.
       Connect phone to pc and wait
5.
       Send us IMEI + MEP + Model + Carrier to swiftunlocks@gmail.com and we will correct the code with ONE exact code.
OR
(BB Reader method)
http://www.swiftunlocks.net/BB-READER.zip
1.
      Instructions in zip
2.
      Send the screen info (control V ) along with country and operator info to swiftunlocks@gmail.com
How to Enter Unlock Codes on HP 6500, 6510, 6515, 6945, HW6510, HW6515, HW6920, HW6925:

1) Insert NON Cingular SIM into device
2) Power on the device
- Wait approximately 30 seconds until the SimLock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)
3) Enter the unlock code in the blank field
4) Press Ok
- If the unlock code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information)
- If the unlock code is correct, a success dialog will appear.
5) Press Ok
How to Enter Unlock Codes on G1, G2, 2125, 3125, 8100, 8125, 8525, 8900/8925 (Tilt), P4600 (Fuze), Dash, Dash 3G, Wing, Shadow, Excalibur 100, MDA, SDA, Touch Pro 2 (TP2), myTouch 3G, Magic:

1) Power on with Non-allowed SIM card
2) Enter unlock code when prompted
3) Enter code using the ON-SCREEN keyboard (This is if the screen HAS an ON-SCREEN keyboard) when unlocking a Pocket PC Phones
4) Press Ok
5) Phone Unlocked


How to Enter Unlock Codes on HTC Ozone:

1) Power on
2) Go to Settings
3) Go to Phone
4) Go to Network
5) Put phone on GSM mode
6) Go to Security
7) Go to Select SIM Manager
8) Go to unlock SIM
9) Phone will prompt for a code, enter the unlock code and press OK
How to Enter Unlock Code on LG CU320:

1) Power on the handset
2) In Idle screen, input the special code "277634#*#".
3) Enter the SIM Unlock code
4) Access the submenu "SIM Test" in Phone Test Mode.
5) Input the special code "2945#*#".
6) Access the submenu "SIM Unlock" which is just activated after the special code.
7) Input the 8-digit Unlock code in the "Enter unlock code" input screen.
8) It will be unlocked.


How to Enter Unlock Code on LG CU400/CU405:

1) Insert non-Cingular SIM card"
2) Power on the handset - Phone will display "Invalid SmartChip".
3) Enter 159753#*#
4) Enter the 8 digit SIM Unlock code
5) Select "OK".
6) The handset will be unlocked.


How to Enter Unlock Code on LG CU500:

1) Insert non-Cingular SIM card.
2) Power on the handset. Phone will display "Invalid SmartChip"
3) (IF THE PHONE DOES NOT DISPLAY INVALID SMARTCHIP, PLEASE POWER OFF AND ON AGAIN)
4) In Idle screen, enter 159753#*#. Phone will display "Enter NCK, Remaining 5
5) Enter the 8 digit SIM unlock code
6) Select "OK"
7) The handset is now successfully unlocked.


How to Enter Unlock Code on LG CU515:

1) Insert non-Cingular SIM card
2) Power on the handset - Phone will display "Invalid SmartChip".
3) Enter *#865625# then select option 1 and then again select 1
4) Enter the 16 digit SIM Unlock code
5) Device should say: Network Lock Deactivated
6) The handset is unlocked.


How to Enter Unlock Code on LG CU575 (Trax):

1) Put a non-Cingular sim in the phone
2) Phone says invalid smart chip
3) Now enter *#865625# then select option 1 and then again select 1
4) Enter your 16 digits code
5) Device should say: Network Lock Deactivated
6) The handset is unlocked.


How to Enter Unlock Code on LG CU720/TU720 (Shine):

1) Insert At&t SIM card
2) Power on the handset
3) Type *#865625#
4) the phone will ask you to input the unlock code twice, just input the unlock code
5) Device is now unlocked

If Above does not work

Try using a non-allowed SIM card (SIM that didn't come with the phone) and do the same steps for 2, 3, 4 & 5.


How to Enter Unlock Code on LG CU915/CU920 (Vu):

1) Insert At&t SIM card
2) Power on the handset
3) Type *#865625#CODE (CODE is the code we provided you)


How to Enter Unlock Code on LG C2000:

1) Insert non-Cingular SIM card
2) Power on the handset - phone will display "phone restricted"
3) Select "Cancel" - phone will display "phone restriction code"
4) Enter the SIM Unlock code
5) Select "OK" - the handset is now successfully unlocked


How to Enter Unlock Code on LG CT810 (Incite):

1) Dial this into the LG Incite's phone menu
2) 2945#*810#
3) Press CALL.
4) It should you ask you for the code.


How to Enter Unlock Code on LG CB630 (Invision):

1) Insert an AT&T or Cingular SIM in the phone; it does not have to be an active SIM
2) Dial this into the LG Incite's phone menu
3) *#865625#
4) Press CALL.
5) It should you ask you for the code.


How to Enter Unlock Code on LG GR500 (Xenon) or GT365 (Neon):

1) Turn on the phone to the main screen (no SIM needed)
2) Dial this into the LG Incite's phone menu
3) *#865625#
4) Press CALL.
5) It should you ask you for the code.


How to Enter Unlock Code on LG KE970 (Shine):

1) Switch ON your phone with an allowed SIM card
2) Then compose: 2945#*9701#
3) Press CALL.
4) It should you ask you for the code.


How to Enter Unlock Code on LG TU500:

1) Insert an Invalid SimCard
2) When 'invalid smartcard' appears, compose: 2945#*9701#
3) Press CALL.
4) It should you ask you for the code.


How to Unlock LG (Other models not listed, Example:CE110, CF360, CG180, CG225, C1300, C1300i, C1500):

1) Insert not-allowed SIM card
2) Power on the handset- phone will display "phone restricted"
3) Select "Cancel" - phone will display "phone restriction code"
4) Enter the SIM unlock code
5) Select "OK" - the handset is now successfully unlocked

How to Enter Unlock Codes on C139, v190, v3, v3i, v3r, v3re, v3xx, RAZR, RAZR 2, K1 (KRZR), K2 (KRZR2), VA76r (Tundra), v6, v8, v9, v9x, S9, SLVR, SLVR 2, c168/c168i, L2, L6, L7, Q/Q9H, MPX220, W233, Z3, Z6, Z9 & any other Motorola Phone:

1) Switch ON your phone with a not allowed SIM Card
2) Phone should show 'Enter Special or Subsidy Code',
3) Enter unlock code
4) Your phone is now unlocked.

WARNING: if any of these messages appear :
- "Contact Service Provider"
- or "Tamper Alter"
- or "Wait Before Enter Special Code"
- or "Contact Service'


It's because you or somebody else has already entered too many wrong codes. You just have to leave the phone ON on the error message and after 1hr - 8hrs the message "Enter Special Code" will appear again!

Issues with Q700 Motorola Slide Unlock Codes
If receive message: "WAITING FOR ACTIVATION A welcome screen will appear within 48 hours after purchase. If does not, call Custumer Care to check your account status. Until then, press menu to place emergency calls," you will need to press menu and the letter "L" at the same time, and the phone will be working.
How to Enter Unlock Codes on Treo 650, 680, Centro:

1) Remove Treo battery, unplug cable
2) Insert incorrect a not allowed SIM card (one the phone does not accept)
3) Power on your Treo, 'Sim not allowed' is displayed, click OK
4) Go to the dial pad, and use the stylus to enter code *#*#CODE#. Then press 'Dial'. (substitute the word "code" with the unlock code we gave you).
5) Phone will reset and display 'sim lock removed'


Ensure you enter the codes in this manner *#*#CODE# (e.g. *#*#12345678#)

Troubleshooting
Error Message: "The SIM Lock has NOT been removed from this phone"
Solution 1: Please make sure you are entering the correct code and enter it using this method *#*#CODE# dial
Solution 2: If the phone says that the SIM lock has not been removed, ensure that the phone radio (wireless mode) is on.


If still having the error message "The SIM Lock has NOT been removed from this phone," the phone is likely refurbished and cannot unlock by code. Refurbished phones from the manufacturer are reflashed and take on a new IMEI. Because of this, the only way to unlock the phones is by software unlocking the phone.



How to Enter Unlock Codes on Treo 750:

1) Power on with incorrect sim, enter unlock code when prompted
2) Enter code using ON-SCREEN (NOT physical keys) keyboard when unlocking a Pocket PC Phones

If above doesn't work

Wait for the next timout to complete. Then HOLD the white key button on the far left of the keyboard and then enter the unlock code with the PHYSICAL keys, not On-Screen.
How to Enter Unlock Codes on Nokia (all models):

At&t/T-mobile Nokia Phones, compose: #pw+CODE+1#
Rogers/Fido Canada Phones, compose: #pw+CODE+1# or #pw+CODE+7#

1) Remove SIM CARD
2) Type #
3) Then press the * key 3times (you should get a "p")
4) Then press the * key 4times (you should get a "w")
5) Then press the * key 2times (you should get a "+")
6) Enter unlock code sequence
7) Then press the * key 2times(you should get a "+")
8) Then enter: 1 or 7 (For your appropriate phone)
9) Enter: #
NOTE: If you enter a code and it shows 'Phone Freeze', this means the phone has been hard locked due to the number of wrong attempts. If you need the Freeze Codes, please contact me on prices.


How to Enter 'Phone Freeze' Codes

1) With wrong sim enter 8 digit freeze code press ok button
2) Then enter network unlock code

Do NOT use: #7465625*638*code#

FREEZE SERVER IS CURRENTLY DOWN (Down since August 1st): If you need to remove the freeze on the phones, check in your local area if there is an independent cell phone shop that carries arry hardware devices (NsPro Box) to remove the freeze from the phones.


How to Enter Unlock Codes on a BlackJack (i607/i617)

1) Power on with Incorrect SIM
2) Phone will prompt for Network Pin
3) Use Code provided and press OK

ERROR MESSAGE: WRONG PASSWORD or INVALID CODE - If you receive one of these messages when entering the code for the Blackjack, the phone is likely to be refurbished. In cases like these, unlocking of the phone by code cannot be done, only by machine. Many cell phone shops do carry hardware devices (NsPro Box) to remove the unlock from the phones.

NOTE: If you are unable to connect to service provider or unable to make out going calls or recieve messages, this has nothing to do with your phone being locked or not, you need to force the BlackJack to change to GSM mode, this can be done as follows:
1) Power on your Phone
2) Enter *#1546792*#
3) Select Option 3 Network & Call Settings
4) Select option 5 Network Mode
5) Select GSM


How to Enter Unlock Codes on a Samsung A117, A137, A167, A177, A237, A257 (Magnet), A436, A437, A517, A637, A657, A707, A717, A727, A737, A747 (SLM), A757, A767 (Propel), A777, A787, A817, A827 (Access), A837 (Rugby), A867 (Eternity), A877 (Impression), A887 (Sostice), C417, i637 (Jack), i907 (Epix), X497, ZX10, ZX20, T219, T229, T239, T309, T319, T339, T429, T459 (Gravity), T469 (Gravity 2), T609, T639, T729 (Blast), T739, T749 (Highlight), T819, T919 (Behold), T929 (Memoir)

1) Power on without SIM card
2) Compose: #7465625*638*CODE# (by "CODE" I mean the unlock code I gave you)


How to Enter Unlock Codes on a A127, P777, D357, D407, D807, T539 (Beat), T629, Z105 and Z107:

1) Power on without SIM card
2) Compose: #0111*CODE# (by "CODE" I mean the unlock code I gave you)


How to Enter Unlock Codes on Samsung (all other models):

1) Switch ON your phone with a not accepted SIM card
2) Phone will ask for the "Password"
3) You can now enter the unlock code

How to Enter Unlock Codes on C3, C3B, C120, C530 (Slate), C610, C630, C810 (Duo), C820 (Matrix Pro):

1) Power on with Non-allowed SIM card
2) Enter unlock code when prompted
3) Enter code using the ON-SCREEN keyboard (This is if the screen HAS an ON-SCREEN keyboard) when unlocking a Pocket PC Phones
4) Press Ok
5) Phone Unlocked

ISSUE PANTECH DUO (C810): Many times you may face an issue saying "This phone only accepts SIMs from specific networks, and has been blocked. Contact your customer service center for the unblock code. Unblock code:
___________
New pin:
___________
Confirm new pin:
___________"

If you get this message, the issue is that your phone needs to have the newest Windows Mobile 6.1 installed. You can get this from here:
Pantech Duo WM6.1 Update


How to Enter Unlock Codes on C150, C520 (Breeze), C740:

1) Put AT&T SIM card in C740
2) Turn on
3) Enter *#865625# on idle screen
4) SIM Unlock Process - Click Yes.
5) Enter 8 digits unlock code and click OK (soft key)
6) Re-enter the unlock code.
7) Unlock Process Complete
8) Click OK (soft key)
How to Enter Unlock Codes on Sidekick (all models):

1) Insert a SIM card from a different network provider and turn on the Sidekick. A dialog screen comes up, prompting you for the code.

2) The box will say:

Title: Special Code Required
Dialog: Enter code to enable SIM
Box for Code: 1-8 digits
Options: Enable or Cancel

3) In the upper right hand corner, the SIM is flashing where the signal strength should be. On entering the code, a dialog box comes up saying authenticating code. It's unlocked. Enjoy.
In case you see the 'Waiting for Activation Screen', hit the menu key and the letter L key at the same time. The menu key is the top left key. By doing this, the waiting screen will go away and you will be able to make calls. For best results, hold down Menu and the L key until the Waiting for Activation screen disappears.
How to Enter Unlock Codes on C61, M56, S56, S66, SL56, SX56, SX66:

*#0001*yourunlockcode#

or

*#0000*yourunlockcode#
How to Enter Unlock Codes on Aircard 860, 875, 875u, 881, 881u, 885, 885u:

Please download and install Sierra Watcher. Once you have Watcher installed put the non-Cingular SIM into the card and Watcher will prompt you to enter the unlock code. Please make sure to enter the unlock code correctly.
If your phone has a "JOGDIAL" (for example SonyEricsson K700i), then you must press the "down arrow" instead of the "left arrow" for step 3 & 5. By "Down Arrow" I mean directing the Jogdial down!

How to Enter Unlock Codes on Sony Ericsson Cell Phones (Most models):

1) For the unlocking of a locked Sony Ericsson no sim card is required.
2) Turn on the handset. Display will indicate 'Insert SIM.'
3) Press the left Arrow (<) button.
4) Press the star (*) button twice.
5) Press the left Arrow (<) button again.
6) You will briefly see one of the following messages listed on devices display: 'Personalized with MNC2' or 'Personalized with MNC3'.
7) Wait approximately three seconds.
8) The display will indicate 'Network' and a picture of a closed lock.
9) Press Select.
10) The display will indicate 'Unlock (Net) 5' and 'NCK:'
11) Enter the 16 digit NLCK4U code (unlock code we provided you) and press okay.
12) The handset will display 'Network unlocked' and the display 'Insert SIM' appears.
13) The handset is successfully unlocked.

NOTE:
1) When doing the first 5 Steps, you need to do it fast.
2) If you get NCK: (0), this means the phone is hard locked. The phone cannot be unlocked since there have been more than 5 wrong attempts.
3) If you have tried a few times and are getting 'Not Allowed', your phone cannot unlock due to too many wrong attempts made on the phone. Phone has been hardlocked.


How to Enter Unlock Codes on TM506:

1) Insert a T-Mobile SIM into the device.
2) From the main screen, press the Navigation key left.
3) Press the Star * key.
4) Press the Star * key again.
5) Press the Navigation key left.
6) The handset displays Network Locked.
7) Select OK.
8) Enter the 16 digit SIM subsidy unlock code.
9) Select OK.
How to Enter Unlock Codes on UTStarcom (all models):

1) Insert AT&T SIM card into phone
2) From the phone pad dial *#865625# and it will prompt for the code.
[Sleeker_special_clear]